Some detail work on the collar..
The shoulder pads.
I've cut the details out and then put the heater on it.
That way you get the look as if it's really cut al the way trough.
Then the sewing could begin.
Later in this post you'll see how I did that ;-)
And then off course some plasti dip.
The hood... this was really NOT easy.
It's a case of fitting and draping and fitting and...
well, you get the picture.
I sewed the pieces by hand because I couldn't fit it between my sewing machine and
it didn't have enough power to put the needle trough.
The front of the armor.
FINALLY
Where to begin?
Well
I took the same templates like the back and made them longer.
Then I just fitted them using the heat blower shaping them to my body.
A lot of holding on, tape and extra hands were needed throughout the progress.
I didn't have the extra hands to take pictures, but my guess is that you wouldn't be able to use them if you were to make a Valka outfit yourself.
It's really a case of trying and finding your own way during the process.
Here's a detail from a cut I made in the foam after I put the heat gun on it.
Sewing the thread into the foam I needed a needle that you use for leather.
You can easily find one in a regular store.
I tried to make the knots as little as possible inside.
After sewing everything in place I've put tape on it just to hold the knots in place.
So, please don't mind my face, I look bloody awful.
This is the result without plasti dip, and the arms aren't finished yet too.
Not quite there yet..
First up:
the shoulder straps.
Not that difficult..
I've put some velcro inside my armor and on the straps.
that way I can easily get it on/of.
The shell on the back was also not a lot of work.
I just measured it with a piece of paper and transferred it to a piece of foam.
The shell was then secured to the straps.
Inside of the shell and on the back of the armor I placed little pieces of velcro.
That way everything stays in place.
I've put pins and a shell on both my arms.
The pins were made of 2 pieces of 5mm foam glued together, cut and
sanded in the wanted shape.
This is the full work
BEFORE
and
AFTER
plasti dip
This looks
sooooooooo baddasssssss!!!



































Comments
Post a Comment